|
21.10.2021 11:04:57
|
|
Boiler Bricks17
|
Product Name:Boiler Bricks
Product Description:
Boiler clay firebricks refers to the content of AI2O3 30%~40% of aluminum silicate clay products.The mineral composition of clay brick is mainly kaolinite and 6%~7% impurity. Clay brick belongs to weak acid refractory products.The three-level high aluminum brick belongs to the neutral refractory material, which has good resistance to acid, alkali slag, corrosion, oxidation and reduction reactivity of metal liquid, as well as high thermal stability, refractoriness above 1770℃, good slag resistance and so on.
Product features:
1, refractoriness: the refractoriness of clay refractory brick is determined by his chemical composition and impurity content. From his physical and chemical indexes, it can be seen that the higher the content of Al2O3, the higher the corresponding liquidus temperature.The general boiler refractory bricks in 1580-1750℃.The higher the content of Al2O3, the higher the corresponding liquidus temperature.
2, load softening temperature: because boiler clay firebrick at a lower temperature liquidus and began to soften, if the external force will be deformed, so the load softening temperature of clay firebrick is much lower than the refractoriness, only 1350℃.
3, slag resistance: clay firebrick belongs to the neutral bias to acid firebrick, so the resistance of clay firebrick to alkaline slag erosion is slightly worse.
4, thermal shock: the thermal expansion coefficient of boiler firebrick is small, good thermal shock resistance, the number of water cooling at 850℃ is generally 10-15 times.
Physical and chemical indexes of high alumina brick products
Project level 1 high alumina brick level 2 high alumina brick level 3 special high alumina brick
Product Category:
1, according to the use of clay firebrick can be divided into blast furnace with clay firebrick, blast furnace with clay firebrick used in small blast furnace lining furnace throat, furnace body, hearth, furnace bottom and large blast furnace body.
2, hot blast stove with clay brick, hot blast stove with clay brick for hot blast stove, regenerator and partition wall.
3, glass kiln with large clay firebrick, glass kiln firebrick for masonry glass kiln.
Product use: because of the low softening temperature under load, shrinkage at high temperature, poor thermal conductivity, weak mechanical strength, so the clay brick is only used in the secondary part of the coke oven, such as the sealing wall of the regenerative chamber, small flue lining brick and grid brick of the regenerative chamber, furnace door lining brick, furnace top and rising pipe lining brick and other parts.It is suitable for the lining of blast furnace, hot blast furnace, electric furnace, cupola, coke oven, soaking furnace, heating furnace, refining furnace, rotary kiln and all kinds of industrial furnace, flue, smoke chamber and so on.
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/boiler-bricks.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
21.10.2021 11:04:58
|
|
High Temperature Fire Refractory Bricks1
|
Product Name:High Temperature Fire Refractory Bricks
Product Description:
High Temperature Fire Refractory Bricks
Product Description
Fire clay bricks are mainly made from charlotte, flint clay and combining clay powder, being pressed under high pressure and sintered in high temperature.
Low porosity bricks are made from low mullite stones, the main mineral composition of the low mullite stones are pressed and sintered mullite phases. The bricks have very good physical and chemical properties in high temperature conditions.
Features and advantages:
1.High refractoriness,
2.High-temperature endurable.
3.Good corrosion resistance.
4.Good spalling resistance and wear resistance.
5.Good thermal shock resistance.
6.High mechanical strength.
7.High-temperature creep rate is low.
8.Good volume stability at high temperature.
Application:
They are widely used in all parts of furnace lining for middle and small capacity furnace such as glass furnace, blast furnace, hot-blast furnace, cement furnace,chemical furnace and other heating engineering equipment.
fire resistant clay brick Technical Index:
Fire Clay Brick
Lower Porosity clay brick
DK-32
DK-34
DK-15
DK-12
Al2O3
≥40
≥42
≥42
≥45
Refractoriness °C
≥1710
≥1750
0.2MPa Refractoriness under load °C
≥1320
≥1400
≥1470
≥1500
Permanent liner change%
1350°C×3h
+0.2~-0.5
1400°C×2h
+0.1~-0.4
-0.2~+0.4
+0.05~-0.1
Apparent Porosity %
≤24
≤22
≤15
≤12
Cold crushing strength Mpa
≥19.6
≥29.4
58.8
68
Bulk Density g/cm3
2.1
2.15
2.3
2.37
Common sizes:
Straight type
Arch type
Wedge type
L×W×H (mm)
230×114×65
230×114×75
230×114×32
220×110×60
220×110×50
220×110×40
220×110×30
L×W×H/h (mm)
230×114×65/55
230×114×65/45
230×114×65/59
220×110×65/50
220×110×75/65
220×110×60/40
L×W×H/h (mm)
230×114×65/55
230×114×65/45
220×110×75/65
220×110×60/40
Other sizes according to customer requirements
Picture of fire resistant clay brick
fwefwef_
Packaging & Shipping
Packing of fire bricks:
Standard export wooden pallet with PET strap fixed,paper or non-woven fabrics between layers, finally wrapped with plastic shrink film from outside.
Shipping of fire bricks: By vessel or plane from any Chinese port
Our Services
1.Timely response,
Timely response to your inquiry, multiple choice recommendations based on your demand,quickly respond mails and provide solutions.
2.Free sample
Sample and trial order are accepted for the quality evaluation
3.Strict quality control
Arrange production on time and control quality strictly.
4.Shorter delivery time.
Book the earliest vessel or plane to guarantee the delivery time.
5.Professional Services
Provide all the detailed news and pictures from order to delivery;
Offer relative export documents and original certificate if needed;
Warm and considerable after-sale service
Company Information
Huanya refractory headquarters in Foshan,Guangzhou, our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
202109182309409e16d9ff246442eaabb8a1a5de2c84ba
FAQ
Q1.How can I get your prompt quotation of the fire resistant clay brick ?
We can give our offer quickly if you kindly send the inquiry with following factors of the fire resistant clay brick: drawing, dimension (length*width*thickness), service temperature, application and quantity.
We' d be appreciated if you can also provide the density and AL2O3 content of the brick.
Q2. What is the MOQ (minimum order quantity)?
1 pallet.
Q3.What is the HS code?
The HS code is 69022000
Q4. How can I contact you?
Contact us:
Martin
Tel:8617328087470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/high-temperature-fire-refractory-bricks.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
21.10.2021 11:04:58
|
|
Alumina Silica Fireplace Fire Brick T356
|
Product Name:Alumina Silica Fireplace Fire Brick T3
Product Description:
Alumina silica fireplace fire brick T3
alumina silica fireplace and pizza ovens refractory fire clay brick T3
Item
T3
Al2O3 %
42 - 45
Fe2O3 %
2.5 max
Refractoriness ℃
1740 min
Refractoriness under load (0.2MPa) ℃
1350 min
Linear change on reheating %(1400℃, 2h)
+0.1~ -0.4
Apparent porosity %
24 max
Cold crushing strength Mpa
30 min
Payment terms
L/C,T/T,D/P
Delivery time
Shipped in 30 days after payment
High Alumina Brick
1.Description
Our supply range of high alumina bricks are useful in the construction of steel refining furnaces, glass tanks, ceramic kilns, enamel kilns and rotary cement kilns. The high alumina bricks comprise of a blend of alumina and ferrous content and their apparent porosity is 15 to 23%. They have high refractoriness and can sustain themselves easily even in high temperature. This is the reason why they are used as high temperature equipments in various industries. These high alumina bricks are highly resistant to corrosion due to metal fluid and oxidation.
2.Feature
1. High refractoriness.
2. Good spalling resistance and wear resistance.
3. Good corrosion resistance.
4. Good thermal shock resistance.
5. High mechanical strength.
6. High-temperature creep rate is low.
High alumina bricks Application:
High alumina brick is widely used for Widely used in blast furnaces, Hot Blast Stove,Steel ladle lining, Reheating furnace, Cement kiln, Tunnel kiln,boiler, coke oven, carbon furnace,glass kiln , Steel smelting furnace and various kiln lining and thermo technical equipment, etc.
Physical And Chemical Indicators Of Product
Brand Properties
HY-40
HY-38
HY-37
HY-36
HY-35
Refractoriness (SK)
40
38
37
36
35
Apparent Porosity (%)
22
23
23
23
23
Bulk Density (g/cm3)
2.65
2.40
2.35
2.30
2.25
Cold Crushing Strength(MPa)
70
52
50
45
40
Thermal Linear Expansion(%) @1000deg
0.6
0.6
0.6
0.6
0.6
Permanent Linear Change(%) @1400degx2hrs
±0.2
±0.3
±0.3
±0.3
±0.3
Refractoriness under Load (℃) @0.2MPa
1,530
1,500
1,450
1,420
1,380
Chemical Composition(%) Al2O3
80
72
60
50
46
Chemical Composition(%)Fe2O3
1.8
2.0
2.0
2.0
2.0
Main Applications
- Nonferrous Metal Furnace - Rotary & Shaft Kiln - Various Incinerator - Reheating Furnace - Permanent Lining For EAF Ladle - General Industrial Furnace etc.
Huanya refractory headquarters in Foshan,Guangzhou, our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Delivery
Package Informations:
1.Packed in a 100cm*100cm fumigated wooden pallet with a waterproof plastic film cover, and tightened with plastic bandages.
2.We can also pack the goods according to your requirements.
Shipping:
1.FEDEX/DHL/UPS/TNT for samples.
2.By Sea for batch goods.
3.Customers specifying freight forwarders or negotiable shipping methods!
4.Delivery Time:3 days for common shape samples;15 days for special shape samples.Within 30 days for batch goods.
FAQ:
Q: Are you a manufacturer or trader ?
A: Manufacturer, some time we help our clients to purchase relevant products as a trader.
Q: Can we visit your factory?
A: Of course ,welcome at any time,seeing is believing
Q: Did your factory accept customization ?
A: Professional technology teams and engineers all can satisfy you.
Q: What’s the proportion of abroad business?
A: Abroad market around 35%; Domestic market around 65%; and now export proportion is increasing.
Contact us:
Martin
Tel: +86-757-85503335
Mobile: +8617328087470
Email: Martin@huanya-refractory.com
Zipcode: 528200
Add: 4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
www.huanya-refractory.com
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/other-bricks/alumina-silica-fireplace-fire-brick-t3.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
21.10.2021 11:04:58
|
|
High Temperature Resistance Alumina Fire Brick24
|
Product Name:High Temperature Resistance Alumina Fire Brick
Product Description:
China supplied high temperature resistance alumina fire brick for boiler with competitive price
High Temperature Resistance Alumina Fire Brick
Introduction to alumina fire brick
Alumina fire brick is a kind of refractory material. It is an aluminum silicate refractory product with aluminum oxide (Al2O3) content higher than 48%. The main component of this refractory brick is AL2O3.. It is formed and calcined from alumina or other raw materials with high alumina content. High thermal stability, refractoriness above 1770℃. It has good slag resistance and is used for lining steel-making electric furnaces, glass melting furnaces, cement rotary furnaces, etc.
Product performance of alumina fire brick
1. Refractoriness of alumina fire brick
The refractoriness of alumina fire brick is higher than that of clay bricks and semi-silica bricks, at 1750~1790℃, which belong to advanced refractory materials.
2. Load softening temperature of alumina fire brick
Because high-alumina products have high Al2O3, less impurities, and less fusible glass bodies, the load softening temperature is higher than that of clay bricks. alumina fire brick, but because mullite crystals do not form a network structure, there is still no silicon at the load softening temperature. Brick high.
3. Slag resistance of alumina fire brick
alumina fire brick contain more Al2O3, which is close to neutral refractory materials, and can resist the erosion of acidic slag and alkaline slag. Because of the inclusion of SiO2, the ability to resist alkaline slag is weaker than that of acidic slag.
Classification of alumina fire brick
1. Classified by Al2O3 content in alumina fire brick
ClassⅠ: Al2O3 content>75%
ClassⅡ: Al2O3 content is 60~75%
ClassⅢ: Al2O3 content is 48-60%.
If Al2O3 content is higher than 80%, it is called super alumina fire brick
If Al2O3 content is higher than 90%, it is called corundum brick.
2. Classification of alumina fire brick by firing process
It can be divided into fired alumina fire brick and unfired alumina fire brick. The firing temperature of the first and second grade alumina fire brick is 1500℃-1600℃ and 1450℃-1500℃ respectively, while the third grade is lower. High-alumina non-sintered bricks mainly refer to phosphate high-alumina.
3. Classification of alumina fire brick by mineral composition
It can be divided into five types: low mullite, mullite, mullite, corundum, corundum and corundum;
4. Classification of alumina fire brick according to different shapes
It can be divided into standard alumina fire brick, special-shaped alumina fire brick and special alumina fire brick;
5. Classification of alumina fire brick according to their properties
It can be divided into ordinary alumina fire brick and special alumina fire brick (thermal shock resistance, low creep, anti-stripping alumina fire brick;
6. Classification of alumina fire brick by use
It can be divided into high-aluminum and high-alumina bricks, hot-blast stove high-alumina bricks, steel-making electric furnace top high-alumina bricks, Shenggang barrel high-alumina bricks, and inner cast high-alumina bricks.
Technical Data Sheet
Technical Data Sheet of alumina fire brick
Grade
SK-32
SK-34
SK-36
SK-38
SK-40
Al2O3 % ≥
48
55
65
75
80
Fe2O3 % ≤
2.5
2.0
1.8
1.6
1.5
Refractoriness (℃) ≥
1770
1770
1770
1790
1790
Apparent Porosity % ≤
24
23
23
22
21
Bulk Density (g/cm3) ≥
2.15-2.25
2.25-2.35
2.35-2.45
2.45-2.65
2.65-2.75
Cold Crushing Strength (Mpa) ≥
35
40
45
55
60
Refractoriness Under Load 0.2Mpa (℃) ≥
1300
1350
1400
1490
1530
Permanent Linear Change %
1300℃×2h
1350℃×2h
1400℃×2h
1500℃×2h
1550℃×2h
+0.1~-0.4
+0.1~-0.4
+0.1~-0.4
+0.1~-0.4
+0.1~-0.4
Application of alumina fire brick
alumina fire brick are mainly used to build blast furnaces, hot blast stoves, electric furnace tops, blast furnaces, reverberatory furnaces, rotary kiln linings, cement rotary kiln transition zones, preheaters and other thermal equipment requiring heat shock resistance; in addition, alumina fire brick are also widely used as open hearth regenerative checker bricks, plugs for pouring systems, nozzle bricks, etc.
Delivery
Package Informations:
1. Packed in a 100cm*100cm fumigated wooden pallet with a waterproof plastic film cover, and tightened with plastic bandages.
2. We can also pack the goods according to your requirements.
Shipping
1. FEDEX/DHL/UPS/TNT for samples.
2. By Sea for batch goods.
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time:3 days for common shape samples;15 days for special shape samples.Within 30 days for batch goods.
FAQ:
Q: What's the MOQ?
A: No limitation.
Q: What's your payment terms?
A:Negotiation
A: For every production processing,we have complete QC system for the chemical composition and Physical properties.After production,all the goods will be tested ,and the quality certificate will be shipped along with goods.
Q: Does your FOSHAN HUANYA Refractory Material Co., Ltd. supply samples?
A: Yes, we can supply samples for free, and the freight will be undertaken by clients.
Contact us:
Martin
Tel:8617328087470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/high-temperature-resistance-alumina-fire.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
21.10.2021 11:04:59
|
|
Introduction Of Lightweight High Alumina Bricks88
|
Product Name:Introduction Of Lightweight High Alumina Bricks
Product Description:
Introduction of Lightweight High Alumina Bricks
Light Weight cheap boilers refractory bricks, also known as high-aluminium heat insulating brick, are used in building heat insulating walls or heat preserving walls, which is basically for preserving or insulating heat. Light weight China alumina silica bricks contain more than 48% alumina oxide. This kind of brick does not directly exposed to high temperature inside kilns or furnaces, it only built closely to the kiln wall as insulations. It is a good insulation refractory material, which has a high compressive strength, low thermal conductivity and good insulation quality.
Specification
Item
HY-1.0
Bulk density(g/cm2)
≥ 1.0
Compressive strength (normal temperature/ MPa)
≥ 3.5
Thermal conductivity (900℃±25)(W/m ?k)
≤0.40
Bulk density (g/cm3)
0.4-1.35
refractoriness
1750-1790℃
202109272224589ae09c8b8f0d40649d56a91a5d5465e7
20210927222459fce60680a0e548be85d7f34e41e4ff87
20210927222459d01516f5f6e84574bca13c37851c3ad3
Product Application
application01
Light Weight cheap boilers refractory bricks is used in parts that is not exposed to abrasions and high temperature of melted matters. They should not be applied in environment that has a temperature higher than 1350℃.
As a low price refractory material, the light weight China alumina silica bricks are applied in: ·Furnace Lining And Insulation Layers ·Ceramic Tunnel Kiln ·Roller Kiln ·Shuttle Kiln ·Heating Furnace & Coking Furnace In Iron And Steel Industry ·Other Thermal Equipment & Heat Treatment Lining
Packing & Delivery
Packaging :Packed by sea-worthy wooden pallet + shrink wrapped + carton according to customers' request. For example, Standard size of Fireclay brick : 230x114x65mm Shipping : 384pcs/plt x 18plts in one 20 feet container;
Company Profie
Foshan Huanya New Material Co., Ltd. is one of leading manufacturers of high quality refractories for use in industries including steel plants, cement producers and glass works etc. Our company can provide not only the domestic and foreign customers excellent quality of high-temperature thermal insulation material, but also the first-rate service including professional furnace lining design, installation supervision, engineering construction etc.
We can provide our customers with professional and personalized products and engineering services according to the actual working condition and requirements of each customer, in order to meet customers' increasing demand of energy-saving and products quality improving. Our tenet is: quality and credibility is fundamental, technology and service is the life. Looking forward to be your partner！
01
Why Choose Us
Give us One minute, just one minute ,you can eliminate your doubts and witness we maintain an Attitude of high seriousness and professional to solve your problems. No.1: We are Manufacturer of refractory materials, so we can provide you Professional Solutions about your problems. No. 2: Our Reputation built in the past years through: Russia, Vietnam and India, etc. You can always get Feedback from our customer in these countries before dealing with us. No. 3: We can provide you the best price, and what you will get from us is our best effort in service and the hospitality that you are willing to become our Friend. So choosing us is the right choice for you.If you are interested in our products or if you have any question, pls feel free to contact us at any time. We will reply you as soon as possible.
FAQ
Q: Are you a factory or a trading company?
A: We are a self-run factory.
Q: The nearest airports are Foshan Shatie Airport and Guangzhou Baiyun Airport.
In the third quarter.What is the delivery time of the new mold and mass production?
A : *7-10 days to make the new mold.
* Batch production takes 20-25 days for 20GP and 25-30 days for 40HQ.
Q: Payment terms?
A: T/T (T/T) and L/C (L/C).
Q: What are the modes of payment?
A:T/T, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: What qualifications does your company have?
A: MA,AL,ILAC-MRA,CNAS industry standard certificates
Contact us:
contact person：Martin
Tel: 8617328087470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/introduction-of-lightweight-high-alumina.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
07.05.2022 09:15:06
|
|
High Temperature Binder77
|
Product Name:High Temperature Binder
Product Description:
High Temperature Binder
High temperature binder is a kind of uniform viscous colloid products, made of a variety of refractory materials and special binder mix, the product has a higher binding strength after curing.
High temperature binder is the best binder for current building blast furnaces, hot blast furnaces, coke ovens, oil refineries, electric furnaces, glass pool furnaces, power plant boilers, petrochemical industry furnaces, etc., as well as for maintenance and rush repair. It is a kind of high quality refractory material with good workability, high temperature resistance, high bond strength and high temperature resistance characteristics.
Products Display:
Feature:
1. High softening temperature under load, drying and barbecue shrinkage
2. High bonding strength after sintering and good overall structure of masonry
3. It has good chemical stability at high temperature
4. Good air tightness and good chemical corrosion resistance
Application:
1. Masonry and bonding between firebricks
2. High temperature bonding between all kinds of refractory materials and refractory fiber products
3. Hardness treatment of refractory fiber surface coating
4. Ceramic industry: roller kiln, tunnel kiln, shuttle kiln, high temperature kiln car, special industrial ceramic firing furnace, etc
5. Glass industry: annealing furnace, toughening furnace, hot bending furnace, etc
6. Building materials furniture industry: stone, Mosaic, solid wood furniture bonding, etc
7. Electronic and electrical industry: magnetic material sintering furnace, thermal equipment (industrial furnace), etc
8. Metal heat treatment industry: forging furnace, tempering furnace, vacuum furnace, carbonization furnace, cover furnace, aluminum melting furnace, ladle cover and heat insulation lining, etc
9. Petrochemical industry: ethylene cracking furnace, reformer, atmospheric/vacuum furnace, coking furnace, flue gas pipeline, etc.
Company information:
Huanya New Materials Co., Ltd. was established in 2018 in Foshan, and then set up branches in Henan and Shanxi.Huanya New Materials Co., Ltd. is a professional manufacturer of refractory products with the ability of production, research and development and sales.
The main products are refractory brick, aluminum silicate ceramic fiber series products, thermal insulation brick and castable, refractory mud, refractory sand, aggregate and other unshaped refractory products.The specifications and models of each product are complete and very popular in the market.
Our products have been exported to India, Bangladesh, Vietnam, Russia, Iran and 13 other countries.The company's products are widely used in metal casting, thermal power generation, glass-ceramics, waste incineration, boiler and other industries.
You are welcome to order if necessary.
Delivery:
Package Informations:
1. Package in Kraft bag or Plastic bag.
2. We can also pack the goods according to your requirement.
Transportation:
1. Fedex/DHL/UPS TNT as sample.
2. Partial shipment.
3. Designated freight forwarder or negotiable mode of transport.
4. Delivery time: 3 days for ordinary shape samples and 15 days for special shape samples.Delivery within 30 days of shipment.
FAQ:
1. What quality tests have your company's products gone through?
MA,AL,ILAC-MRA,CNAS
2. Is it convenient to tour the factory?
Sure,welcome at any time,seeing is believing.
3. What is the shelf life of the product？
We have 1 years warranty.If any quality problems on our side occured in this period ,we will take on the shipping cost and replacement.
4. How soon can we expect delivery？
Generally 10-20days after deposit.
5. Can you send the sample first? Is it free?
Of course,free samples are available,and generally the buyer shall bear all the delivery cost.
6. Is the product customizable？
Of course. We can customize all kinds of refractory products according to your drawings.
Contact us:
contact person：Martin
Tel/Whatsapp: +8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/aluminum-furnace-equipment-consumables/high-temperature-binder.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
07.05.2022 09:15:07
|
|
Curved Fire Brick86
|
Product Name:Curved Fire Brick
Product Description:
Curved Fire brick
Refractory round brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces.
We provide high quality Refractory Fire Bricks that are used on wide range in the various industries like Cement, Glass and Steel. Curved Refractory Fire Bricks are provided as per the quantity and specifications required by the customers. We provide an extensive range of Refractory Fire Bricks at reasonable prices that depend upon the quantity ordered.
Feature:
1. High mechanical strength;
2. Good thermal shock resistance;
3. Good resistance to abrasion and corrosion;
4. Good volume stability at high temperature;
Huanya Curved Fire Brick Size
Curved Brick
Inner diameter
External diameter
RB-7
400mm
520mm
RB-9
340mm
560mm
RB-12
450mm
670mm
RB-14
550mm
750mm
RB-16
630mm
830mm
RB-18
720mm
920mm
RB-20
800mm
1000mm
RB-22
880mm
1080mm
RB-24
960mm
1160mm
RB-26
1000mm
1200mm
Title
Size（cm）
Weight（Kg）
Remarks
Usage
RB-7
ID40,OD52,TH5cm
2.6
6 in a circle
1. Homemade Barbecue,
Kitchen fry oven, pizza oven
2. Electric stove factory, Forceps boiler special purpose
3. Biological combustion furnace
4. Well furnace
5. Garden decoration, beautiful greening, european style fireplace
RB-9
ID34,OD56,TH6cm
5
6 in a circle
RB-12
ID45,OD67,TH7cm
5.6
6 in a circle
RB-14
ID55,OD75,TH10cm
7.3
6 in a circle
RB-16
ID63,OD83,TH10cm
8.9
6 in a circle
RB-18
ID72,OD92,TH10cm
7.3
8 in a circle
RB-20
ID80,OD100,TH10cm
8
8 in a circle
RB-22
ID88,OD108,TH10cm
9
8 in a circle
RB-24
ID96,OD116,TH10cm
9.7
8 in a circle
RB-26
ID100,OD120,TH10cm
8.8
9 in a circle
RB-28
ID110,OD130,TH10cm
8.8
10 in a circle
Application:
1. Iron and steel industry.
2. Non-ferrous metal industry and other industries.
3. Building the lining of the steel-making furnace.
4. Glass furnace, building lining of hot-blast stove, blast furnace, coke oven, pizza oven, rotary kilns of cement etc.
FAQ
1. Can we take some samples?Is there a charge?
Yes, the existing label is free and you need to pay for shipping.
2. How can we get an offer?
Please contact us: such as material, design, size, shape, quantity, etc.
3. Can I make a new sample to confirm according to my design?
Yes.Sample charge refers to the cost set on the production line, a small number of samples are recommended for direct production.We recommend samples for large quantities. The sample fee is refundable
4. Do you have quality control
We have QC personnel on the production line for inspection.All products must be inspected before delivery.We do the inside check and the final check.
5. Q: How many different types of products your company manufactures?
A: Now we have more than 100-200 products. We have a strong advantage of OEM, just give us the actual products or your idea that you want, we will manufacture for you.
6. Q: What 's your MOQ?
A: If we have the products in stock, it will be no MOQ. If we need to produce, we can discuss the MOQ according to customer's exact situation.
Contact us:
contact person：Martin
Tel/Whatsapp: +8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/curved-fire-brick.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
07.05.2022 09:15:07
|
|
Aluminum Dross Separating Machine70
|
Product Name:Aluminum Dross Separating Machine
Product Description:
Aluminum Dross Separating Machine
Aluminum Dross Separating Machine is a kind of machine which adopts foreign advanced technology to separate aluminum from hot aluminum slag. It does not need any fuel and has fast recovery speed. It can make full use of aluminum ash and waste residue with high aluminum content and replace the traditional manual recovery method.The main function of aluminum slag separator is to cool and screen hot slag through water mist.Can immediately cool 700-900℃ hot slag to 50℃.The high temperature vaporization and oxidation of aluminum slag are avoided.The recovery rate of aluminum slag was increased.Produces economic benefits in production.
Feature:
1. Recovering 90% aluminum from ash, high utilization rate
2. Short working time, aluminum and ash sorting can be completed in 10 minutes
3. Belt dust and smoke exhaust equipment, low power consumption, energy saving and environmental protection
4. Fully automatic operation, the efficiency is increased by 15% compared with manual operation
5. Short cooling time, strong processing capacity,
6. Low investment cost, low operation cost, low maintenance cost,
7. Less aluminum ash content, good economic benefit, is conducive to clean the environment.
Instructions For Use：
The melting pot of hot aluminum ash slag out into the car, filed into the container through the automatic feeding device, open elevator fully mixing, stirring system sink to the bottom of the container, after the separation of liquid aluminum formed by feeding device into aluminium ingot mold aluminum ingots, aluminum oxide and impurities is being exhausted from port upper ash discharge, mixing process of harmful gas and debris by the fan into cyclone to collect dust, exhaust gas after purified by water bath dust into the atmosphere, so as to achieve environmental protection requirement.
Application:
1. Electrical aluminum factory connector material instead of part of the slag removal agent;
2. Steelmaking refining furnace with desulfurization, deoxidizer;
3. Recycling the metal in the slag of nonferrous metal smelting, such as aluminum ash, aluminum slag, copper ash, copper slag, zinc and zinc slag.
4. The production of basic aluminum chloride water purifier;
5. The construction industry with high strength mortar.
Products Display:
Company information:
Huanya new materials co., LTD. Cheng Huanya is a professional production of refractory materials, high-grade refractory products and raw materials enterprises.
Products are suitable for metal casting, thermal power generation, glass ceramics, industrial boiler and other industries.Headquartered in Foshan City, the company has branches in Henan and Shanxi.
Founded in 2018, the company has passed MA,AL,ILAC-MRA,CNAS certification.The company has professional production, research and development and sales capabilities of refractory materials, products sold well all over the country, and exported to India, Bangladesh, Vietnam, Russia, Iran and other 13 countries.Our company has comprehensive advanced testing equipment, coupled with advanced testing technology, adhere to the principle of "non-compliance, no sales", perfect after-sales service to customer satisfaction.
The main products are high alumina brick, clay brick, aluminosilicate mark brick, high strength diatomite brick, light insulation brick, low iron mullite brick and other refractory materials for industrial kiln.
A dhering to the business philosophy of "customer first, honest management, benefit sharing and common development", the company will actively explore domestic and foreign markets and sincerely cooperate with customers.
Delivery:
Package Informations:
1. Bulk in Container, 25-27tons/20'container
2.We can also pack the goods according to your requirement.
Transportation:
1. Fedex/DHL/UPS TNT as sample.
2. Partial shipment.
3. Designated freight forwarder or negotiable mode of transport.
4. Delivery time: 3 days for ordinary shape samples and 15 days for special shape samples.Delivery within 30 days of shipment.
FAQ:
1. What is the products quality?
We have MA,AL,ILAC-MRA,CNAS certification and we do 100% test before the shipment.
2. Do you have pictures for this product?
Yes,we can offer you different position pictures for your refernce.
3. Can we test samples first?
Yes,but need to pay the samples cost and delivery cost.
4. Dose this item is OEM quality or for after market?
Both.
5. Is there a discount?
Different quantity has different discount.
6. Can i get some samples?
Yes, we can supply the free sample, but the shipping cost be paid by our customers.
Contact us:
contact person：Martin
Tel/Whatsapp: +8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/aluminum-furnace-equipment-consumables/aluminum-dross-separating-machine.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
07.05.2022 09:15:07
|
|
Magnesia Brick54
|
Product Name:Magnesia Brick
Product Description:
Magnesia Brick Introduction
Magnesia Brick
Magnesia Brick is divided into ordinary magnesia brick, middle magnesia brick, high purity magnesia brick.It is mainly made of heavy - burned magnesia as raw material by high - temperature tunnel kiln.The main mineral phase of the product is magnesite, which has high volume stability and slag erosion resistance.It is widely used in high temperature industrial furnaces such as steel-making and non-ferrous metal smelting.
Features Of Magnesia Brick
1. High volume stability
2. Excellent slag resistance.The magnesia brick containing more than 80% ~ 85% magnesia has good resistance to basic slag and iron slag.
Physical And Chemical Indexes
BRAND
INGREDIENT
MZ-91
MZ-93
MZ-95
MZ-97
DMZ-95
DMZ-97A
DMZ-97B
DMZ-98
MgO(%)
≥91
≥93
≥95
≥97
≥95
≥97
≥96.5
≥97.5
CaO(%)
≤3
≤2.5
≤2.0
≤1.5
≤1.5
≤1.2
≤1.5
≤1.0
SiO2(%)
-
-
≤2.0
≤1.2
≤1.5
≤0.8
≤1.2
≤0.5
A.P.
≤20
≤18
≤18
≤18
≤17
≤17
≤17
≤17
CCS
≥40
≥50
≥45
≥45
≥45
≥50
≥50
≥50
0.2MPa,T0.6(oC)
Initial Softening
Temperature 0.2MPa≥(℃)
≥1520
≥1550
≥1650
≥1700
≥1650
≥1700
≥1700
≥1700
Application Of Magnesia Brick
The main crystal phase of magnesite brick is quadrate magnesite, which has typical characteristics of basic refractory products, but has poor thermal shock resistance.
In the heating furnace and soaking pit, magnesia brick is mainly used to lay the surface layer of the bottom of the soaking pit and the lower part of the soaking pit wall, which can resist the corrosion of oxidized iron sheet.
Basic refractories to magnesium oxide, calcium oxide as the main component, commonly used is magnesium brick.And its fire resistance is higher than that of clay brick and silicon brick.It is mainly used in open hearth furnace, oxygen converter, electric furnace, non-ferrous metal smelting equipment and some high temperature equipment
Our services
1. More professional services in the field of refractory export
2. Better productivity
3. Multiple payment methods are available: Wire transfer, Western Union, Letter of Credit, Paypal
4. High quality/safe materials/competitive prices
5. Small orders are available
6. Quick response
7. Safer and faster transportation
8. OEM design for all customers
FAQ:
1. When can I get the quotation?
We usually quote within 4-8 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
2. How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.
If you need the samples, we would like to send sample from our Chinese factory.
3. Can you do the design for us?
Yes. We have a professional team in design and manufacturing.
4. How long can I expect to get the sample?
3-5 working days for samples by FEDEX/DHL/UPS/TNT.
5. What about the lead time for mass production?
25-30 working days for mass production.It depends on your quantity,and we will try our best to meet your needs.
6. What is your terms of delivery?
EXW, FOB, CIF, etc.
7. What is your packing method
Pack in 100cm*100cm fumigated wooden tray, cover with waterproof plastic film and tie tightly with plastic bandage.It's ok to pack according to the customer's requirements
8. What is the mode of transportation for batch goods
Usually by sea,the customer can designate a freight forwarder or negotiate with us
Contact us:
contact person：Martin
Tel/Whatsapp: +8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/magnesia-brick.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
19.05.2022 09:25:45
|
|
Flint Clay Castable10
|
Product Name:Flint Clay Castable
Product Description:
Flint Clay Castable
Flint Clay Castable is a high quality hard refractory clay.The raw ore is gray, gray and gray black, with fine structure and high hardness. It is not dispersed in water and has low plasticity.It is formed by the calcination of the pyrogemite ore at high temperature. The content of Al2O3 in the calcined pyrogem is about 44%, and the content of Fe2O3 is not more than 2%.Stable composition, uniform texture, compact structure, low water absorption, shell shaped section, white, used to produce high quality clay refractory.The technical term is grade I hard clay clinker, the main chemical components are Al2O3 and SiO2, and a small amount of Fe2O3 and trace of Na2O and K2O are kaolin.
Item
Model
AL2CO3%
Sio2
%
Cao
%
Bulk Density
(g/cm3)
Temperature
℃
High-pure Bauxite
Based Low Cement
Castable
AC-FLO 781
78
15
2.3
2.73
1700
AC-FLO 751
73
18
2.4
2.56
1600
AC-FLO 461
72
19
2.2
2.61
1620
Corundum Mullite
Based Low Cement
Castable
AC-FLO 860
72
23
1.7
2.79
1750
AC-FLO 726
66
27
2.1
2.65
1700
Flint Clay Based
Castable
AC-FLO 651Y
55
39
2.3
2.47
1650
Fused Silica Based Castable
SF-CAST 520AC
23
73
3.7
2.05
1300
Light Weight
Insulating Castable
ALU-LITE 10
56
25
12.8
1.09
1300
ALU-LITE 15
58
26
8.6
1.55
1350
ALU-LITE 18
64
24
6.9
1.83
1400
Impermeable Castable
ALU-CAST 60FS
61
22
8.3
2.2
1350
Alumina Based Repair
Material
ALU-PAKR76AC
67
25
2.5
2.7
1650
ALU-PAKR85AC
83
8
2.8
2.8
1760
Size of particle: 0-1mm,1-3mm,3-5mm,5-8mm,8-15mm,0-5mm,0-50mm
Features and advantages:
1. High refractoriness.
2. Physicochemical stability.
3. Volume density high .
4. Low porosity.
5. Low water absorption.
6. Fully calcined
7. Low impurity content.
8. Pure white.
Products display:
Application:
Flint clay Castable is mainly used for manufacturing high-quality refractory products, refractory castable, sagger, kiln furniture, crucibles, ceramic fiber products, precision casting sand, ceramics products, etc.
Delivery:
Package Informations:
1. Package in Kraft bag or Plastic bag.
2. We can also pack the goods according to your requirement.
Transportation:
1. Fedex/DHL/UPS TNT as sample.
2. Partial shipment.
3. Designated freight forwarder or negotiable mode of transport.
4. Delivery time: 3 days for ordinary shape samples and 15 days for special shape samples.Delivery within 30 days of shipment.
FAQ :
1.What is your lead time?
It usually needs about 15- 20 days after receiving the PO.
2. Can we visit your company?
Yes, for sure, you are welcome to visit Huanya company and our products.
Also, we can talk more about the technique details if you need.
3.How about the payment?
We can accept 30% deposit T/T, or L/C, Western Union and so on.
4.How about the package?
Net weight: 25/50kg or as the customers’ requirements.
5.How does your factory ensure your quality?
Our company has our own technicians so that we can guarantee our products from the tip to tow, which we can have our own reputation.
6.How about your MOQ?
If we have the products in stock, it will be no MOQ. If we need to produce, we can discuss the MOQ according to customer’s exact situation.
Contact us:
contact person：Martin
Tel/Whatsapp: +8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/unshaped-refractory/flint-clay-castable.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
19.05.2022 09:25:45
|
|
Refractory Bricks For Refractory Layer94
|
Product Name:Refractory Bricks For Refractory Layer
Product Description:
Refractory Bricks For Refractory Layer
Manufacturers directly supply clay half-bars, various types of refractory bricks for refractory layer
Product Description
sk34 refractory brick the main chemical components: Al2O3 content is 30%-48%, SiO2 content is 50%-65%, and a small number of alkali metals, alkaline earth metal oxides, etc. Mineral composition is usually mullite, quartz and glass phase. Its refractoriness is 1580-1750℃, refractoriness under load is 1250-1450 ℃, line expansion coefficients is low, with good thermal shock resistance and strong ability to resist erosion acid slag.
Features&advantages
sk34 refractory brick Feature:
Low thermal conductivity
Excellent acid and base slagging resistance
High refractoriness
Excellent thermal shock resistance
Excellent mechanical strength
sk34 refractory brick Advantages:
1. High resistance to thermal shock, abrasion, chemical attack to provide long service life;
2. High dense structure;
3. Low permanent linear change on reheating;
4. Easy operation and installation;
5. Broad usage or applications and low price, etc.
Index
Item
N-1
N-2a
N-2b
N-3a
N-3b
N-4
N-5
N-6
Refractoriness, CN
176
174
174
172
172
170
166
158
Refractoriness under load ,℃ 2kg/cm2≥
1400
1350
1320
1300
Reheating linear change%
1400℃,2h
+0.1-0.4
+0.1-0.5
+0.2-0.5
1350℃,2h
+0.2-0.5
+0.2-0.5
+0.2-0.5
+0.2-0.5
Apparent porosity,%≤
22
24
26
24
26
24
26
28
Compress strength,N/mm2≥
30
25
20
20
15
20
15
15
Thermal shockresistance
N-2b, N-3b must be tested and list the actual measuring data in the quality Certification.
sk34 refractory brick are mainly used in the low temperature parts of blast furnaces, waste incinerators and glass melting furnaces. Due to the scale-up of a variety of industrial furnaces and severity of operating conditions, super dense clay bricks that made of more refined chamotte being calcinated at high temperature are applied more than before. It's popular in the following furnaces:1. Blast furnaces and hot blast furnaces2. Waste incinerators3. Glass melting furnaces
What is the Shapes &Sizes of our fireclay brick?
Straight
Split
Arch
Wedge
Tile
Other Shape
L×W×H(mm)
230×114×65
230×114×75
L×W×H (mm)
230×114×25
230×114×32
230×114×37
230×114×50
L×W×H/h(mm)
230×114×65/45
230×114×65/55
230×114×75/45
230×114×75/55
230×114×75/65
L×W×H/h (mm)
230×114×65/45
230×114×65/55
220×114×75/45
220×114×75/55
220×114×75/65
L×W×H (mm)
230×230×38
230×230×50
230×230×65
230×230×75
Key brick,
Skew brick,
Soap,
Checker,
Neck,
Taper,
We also can make brick according to customers’ drawing and requirements.
sk34 refractory brick Production ProcessCrushing→Mixing→Shaping→Drying→Firing→Inspection→Packaging and Shipment
sk34 refractory brick Shipping
1. FEDEX/DHL/UPS/TNT for samples.
2. By Sea for batch goods.
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time:3 days for common shape samples;15 days for special shape samples.Within 30 days for batch goods.
sk34 refractory brick Payment Terms
1. Payment: T/T, Western Union,LC; Usually 30% deposits,70% balance before delivery or negotiations to solve.
2. MOQ: Usually 1Tons,Customers can order certain PCS for special brick.
3. Quality Warranty: 1 years,
4. Package Informations:
1.On wooden pallets with plastic cover,
2.According to customer's requirements.
(1)Wooden pallet size:930*930mm,Load weight of each pallet:1.5-2.0 Tons.
(2)20 Foot Container can be loaded 25Tons,40 Foot Container can be loaded 28Tons.
FAQ
Q1.What is the difference between Refractoriness and Working temperature ?
A1:Refractoriness:the refractory material withstands high temperature without melting and softening performance in the absence of load resistance.
Q2.How are the products’ quality?
A2:The products will be strictly inspected before shipment, so the quality could be guaranteed.
Q3:What is the Warranty for the fire brick?
A3:For all the brick,we have 1 years warranty.If any quality problems on our side occured in this period ,we will take on the shipping cost and replacement.
Q4.What is the service life of the bricks?
A4:The service life of different bricks is unlike.It also depends on your using condition and method.
Q5:Are you a manufacture or trader?
A5:To be honest we are a trader,but we have stable cooperation factories.And we can supply good pre-sale service, after-sales service.
Contact person: Martin
Tel:8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:http://www.huanya-refractory.com
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
19.05.2022 09:25:46
|
|
Pizza Oven Brick78
|
Product Name:Pizza Oven Brick
Product Description:
Pizza Oven Brick
Pizza Oven brick Introduction
Fire clay bricks are often used in pizza furnace masonry, their aluminum content is about 48%-85%, fire resistance is 1250-1420℃.
There are three types of firebricks commonly used to build a pizza oven, namely clay bricks, wedge-shaped bricks and curved bricks.
Features Of Fire clay bricks
1. Low thermal stress at high temperature.During the operation of the pizza oven, the temperature difference between the inner and outer surfaces of the firebrick on the oven wall is very large, which generates great thermal stress. In other words, the inner side of the brick lining is subject to great compressive stress, while the outer side is subject to great tensile stress.Walls are vulnerable to damage.The clay brick can withstand 1250-1420℃ high temperature, can perfectly avoid damage
2. Good Chemical resistance:The medium around the pizza furnace refractory masonry is mainly gas dust containing alkaline oxide, alkali metal and silicate, etc. Clay refractory brick has excellent corrosion resistance, and the pizza furnace built by masonry has a long life
3. High mechanical strength: fire clay refractory brick can cope well with the strong impact and wear of high temperature combustion exhaust gas on the surface of brick lining.
4. Good creep resistance:The research results of the damage of the hot blast furnace show that the creep of the refractory masonry under the action of high temperature and high pressure is the important cause of the damage of the firebrick used in the pizza oven
HuanYa Refactory Material Bricks Specification
Fireclay Brick Physical and Chemical Index:
Model:
SK-40
SK-38
SK-37
SK-36
SK-35
Al2O3 (%)
≥80
≥75
≥65
≥55
≥48
Refractoriness (°C )
≥1790
≥1790
≥1790
≥1770
≥1750
Bulk density (g/cm3)
2.7-2.8
2.4-2.65
2.3-2.35
2.25-2.3
2.1-2.2
Refractoriness under loading, 0.2MPa
1600
1520
1480
1450
1420
Reheating Linear changes Rate (%)
1500°C x 2H
-0.4~0.1
Apparent porosity (%)
20~22
20~22
23~24
23~24
23~26
Cold crushing strength (Mpa)
55
≥50
≥45
≥40
≥35
Curved Brick
Inner diameter
External diameter
RB-7
400mm
520mm
RB-9
340mm
560mm
RB-12
450mm
670mm
RB-14
550mm
750mm
RB-16
630mm
830mm
RB-18
720mm
920mm
RB-20
800mm
1000mm
RB-22
880mm
1080mm
RB-24
960mm
1160mm
RB-26
1000mm
1200mm
Wedge Brick
Specification
Wide Wedge Brick
230*114*65/55mm
Narrow Wedge Brick
230*114*65/45mm
Delivery
Package Informations:
1. Packed in a 100cm*100cm fumigated wooden pallet with a waterproof plastic film cover, and tightened with plastic bandages.
2. We can also pack the goods according to your requirements.
Shipping
1. FEDEX/DHL/UPS/TNT for samples.
2. By Sea for batch goods.
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time:3 days for common shape samples;15 days for special shape samples.Within 30 days for batch goods.
FAQ
Q1: Are you a manufacturer or trader?
A1: Manufacturer, some time we help our clients to purchase relevant products as a trader.
Q2: What’s the MOQ?
A2: No limitation for the spot goods,but the customized products needs to be negotiated
Q3: Can we visit your factory?
A3: Of course ,welcome at any time,seeing is believing
Q4: What’s your payment terms?
A4: LC/TT, for customized products,30% deposit is required and balance
payment will be paid before shipment
Q5: Did your factory accept customization?
A5: Professional technology teams and engineers all can satisfy you.
Q6: How do you guarantee quality?
A6: For every production processing,we have complete QC system for the chemical composition and Physical properties.After production,all the goods will be tested .
Q7: Does your FOSHAN HuanYa Refractory provide turn-key projects?
A7: Yes, we already finished several turn-key projects at home and abroad.
Q8: Does your FOSHAN HuanYa Refractory supply samples?
A8: Yes, we can supply samples for free, and the freight will be undertaken by clients.
Contact us:
contact person：Martin
Tel/Whatsapp: +8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/pizza-oven-brick.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
19.05.2022 09:25:46
|
|
Fire Clay Brick98
|
Product Name:Fire Clay Brick
Product Description:
Fire Clay Brick
Fire Clay Brick Introduction
1. Fire clay brick is widely used in masonry insulation layer of all kinds of industrial kilns.Containing alumina components about 35-55%.
2. Refractoriness under load is 1250-1420°C.
3. High mechanical strength,including good thermal shock resistance,good resistance to abrasion and corrosion,good volume stability at high temperature.
4. Fire clay brick is commonly used in blast furnace, hot air furnace, heating furnace, power boiler, lime kiln, rotary kiln, ceramic and firebrick kiln.
Fireclay Brick Physical and Chemical Index:
Model:
SK-40
SK-38
SK-37
SK-36
SK-35
Al2O3 (%)
≥80
≥75
≥65
≥55
≥48
Refractoriness (°C )
≥1790
≥1790
≥1790
≥1770
≥1750
Bulk density (g/cm3)
2.7-2.8
2.4-2.65
2.3-2.35
2.25-2.3
2.1-2.2
Refractoriness under loading, 0.2MPa
1600
1520
1480
1450
1420
Reheating Linear changes Rate (%)
1500°C x 2H
-0.4~0.1
Apparent porosity (%)
20~22
20~22
23~24
23~24
23~26
Cold crushing strength (Mpa)
55
≥50
≥45
≥40
≥35
Application:
1. Iron & steel making:Blast furnace,hot blast stove,hot metal ladle,tundish,soaking pit,heat treatment furnace,refining furnace,reheating furnace,metal mixter furnace,cupola furnace.
2. Non-ferrous Metal:Smelting furnace,reverberatory furnace.
3. Building materials:Cement kiln,glass kiln,ceramic kiln,lime kins,kiln car,tunnel kiln,rotary kiln.
4. Energy &Incineration:Coke oven,boiler,power generation boiler,CFB boiler,electric furnace,carbon roasting furnace,garbage incinerators.
5. Others:Petrochemical industry furnace,pizza oven,fireplace, interior trim,chimney.
Installation and construction
Huanya is a refractory material supplier integrating design, research and development, production, sales and construction.Undertake various melting furnaces, kilns, cement kiln,glass kiln,ceramic kiln, lime kilns, kiln car,tunnel kiln projects.welcome to consult.
Delivery
Package Informations:
1. Packed in a 100cm*100cm fumigated wooden pallet with a waterproof plastic film cover, and tightened with plastic bandages.
2. We can also pack the goods according to your requirements.
Shipping:
1. FEDEX/DHL/UPS/TNT for samples.
2. By Sea for batch goods.
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time:3 days for common shape samples;15 days for special shape samples.Within 30 days for batch goods.
FAQ
Q1: Are you a manufacturer or trader ?
A1: Manufacturer, some time we help our clients to purchase relevant products as a trader.
Q2: What’s the MOQ?
A2. No limitation for the spot goods,but the customized products needs to be negotiated
Q3: Can we visit your factory?
A3: Of course ,welcome at any time,seeing is believing
Q4: What’s your payment terms?
A4: LC/TT, for customized products,30% deposit is required and balance payment will be paid before shipment
Q5: Did your factory accept customization ?
A5: Professional technology teams and engineers all can satisfy you.
Q6: How do you guarantee quality?
A6: For every production processing,we have complete QC system for the chemical composition and Physical properties.After production,all the goods will be tested .
Q7: Does your FOSHAN HuanYa Refractory provide turn-key projects?
A7: Yes, we already finished several turn-key projects at home and abroad.
Q8: Does your FOSHAN HuanYa Refractory supply samples?
A8: Yes, we can supply samples for free, and the freight will be undertaken by clients
Contact us:
contact person：Martin
Tel/Whatsapp: +8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/fire-clay-brick.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
19.05.2022 09:25:46
|
|
Calcium Silicate Board2
|
Product Name:Calcium Silicate Board
Product Description:
Calcium Silicate Board
Calcium Silicate Board Introduction
Calcium silicate board is inorganic mineral fiber and cellulose fiber loose short fiber as the reinforced material, with siliceous cementation material - calcium materials as the main body, the pulping, molding, to accelerate the curing reaction in high temperature and high pressure saturated steam, the formation of calcium silicate gel, made of a sheet, it is a kind of good performance of new buildings and industrial plate, its products of fire prevention, sound insulation, insect-resistant eat by moth, good durability is a good selection of ceiling, partition.
Calcium silicate board as a new type of green environmental protection building materials, besides has the function of the traditional plasterboard, has more superior fire resistance and resistant to moisture, the advantages of long service life.
Advantages of Calcium Silicate Board
1) Excellent fire performance: Calcium silicate board is non-combustible Grade A1 material, in case of fire, the board will not burn, will not produce toxic smoke.
2) Excellent waterproof performance: Calcium silicate board has good waterproof performance, in the toilet, bathroom and other high humidity places, can still maintain stable performance, will not expand or deformation.
3) High strength: Calcium silicate board has high strength, and the strength of 6mm thick board is much higher than that of 9.5mm thick ordinary plasterboard with paper surface.Calcium silicate board wall is solid and reliable, not easy to be damaged and broken.
4) Stable size: Calcium silicate board adopts advanced formula, under strict quality control production, wet swelling and dry shrinkage of the board control in the most ideal range.
5) Excellent heat and sound insulation performance: Calcium silicate board has good heat insulation and heat preservation performance. The heat insulation and heat preservation performance of 10mm thick partition wall is obviously better than that of ordinary brick wall, and it also has good sound insulation effect.
6) Long service life: Calcium silicate plate has stable performance, acid and alkali resistance, is not easy to corrosion, and will not be damaged by moisture or insects and ants, which can guarantee a long service life.
Classification of calcium silicate plates
Calcium silicate boards are divided into calcium silicate boards for insulation and calcium silicate boards for decoration.
Calcium silicate board for insulation
Heat preservation with calcium silicate board called microporous calcium silicate, is a white, hard new heat preservation material, with light bulk weight, high strength, small thermal conductivity, high temperature resistance, corrosion resistance, cutting, sawing and other characteristics.It is widely used in electrical power, metallurgy, petrochemical, construction, ship and other fields of equipment piping, wall roof insulation and fire and sound insulation.The thickness is usually above 30mm and the density is between 200-1000kg/m3.
Decoration with calcium silicate board
Decoration with calcium silicate board, is a comprehensive performance known at the world's new building board, since the 1970s in the developed countries to promote the use and development.The thickness is 4-20mm, and the length and width are mainly 1220*2440mm.At the same time there are large specifications of calcium silicate board processed into decorative calcium silicate ceiling, which is widely used in the ceiling with the advantages of fire prevention, anti-sinking, variety more.
Apllication
Commercial buildings: commercial buildings, entertainment places, shopping malls, hotel industrial buildings;Residential construction of factories and warehouses;New housing, renovation of public places;Hospitals, theaters, stations.
The main usages is the wall, ceiling, floor, furniture, road sound insulation, sound absorption barrier, ship bulkhead and air duct and other industrial board and sound absorption wall, sound absorption ceiling, cast wall, composite wall panel and other fields.
Delivery
Package Informations:
1. Packaging:wooden pallet + PE covering + corner protector + strong tape
2. Calcium Silicate Board Specification:600*300*50/piece
3. We can also pack the goods according to your requirements.
Shipping
1. FEDEX/DHL/UPS/TNT for samples.
2. By Sea for batch goods.
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time:3 days for common shape samples;15 days for special shape samples.Within 30 days for batch goods.
FAQ
1. How can I place an order?
You can contact any of our sales staff to place an order.Please provide details of your request as clearly as possible.In this way, we can give you the quotation as soon as possible.
For design or further discussion, it is best to contact us via Skype, Trader ger or instant messaging such as QQ or Whatsapp to avoid delays.
2. When can I know the price
We usually make offers within 24 hours after receiving your inquiry.
3. Can you design for us?
Yes.We have a professional team with rich experience in calcium silicate board design and manufacturing.
4. How soon can I receive the sample?
Delivery within 1-3 days.The samples will be sent to you by express and arrive in 3-5 days.
5. What about the lead time of mass production?
Usually 25-28 days.
6. What are your terms of delivery?
We accept EXW, FOB, CFR, CIF and so on.You may choose the most convenient one
Or save you money.
7. What's the mode of payment?
1) Payment shall be made by TT or Western Union using the order
2) ODM, OEM orders, 30% deposit, 70% payment before delivery.
We are the factory and we can guarantee that our prices are first hand, high quality and competitive price.
Contact us:
contact person：Martin
Tel/Whatsapp: +8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/ceramic-fiber-product/calcium-silicate-board.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
19.05.2022 09:25:46
|
|
Fire Clay Refractory Castable21
|
Product Name:Fire Clay Refractory Castable
Product Description:
Fire Clay Refractory Castable
Fire Clay Refractory Castable is a castable refractory material prepared by using soft clay as a binder and refractory aggregates, powders and admixtures such as aluminum silicate or corundum mullite. The composition of the clay castables is generally 55% to 65% for refractory aggregates, 20% to 30% for refractory powders, and 10% to 15% for combined (soft) clays. The maximum allowable particle size of refractory aggregate is 8mm, and the aggregate size of aggregate is 8~5mm, 35%~40%; 5~3mm, 30%~35%; <3mm, 25%~30%. The particle size requirement of the refractory powder is less than 0.074 mm and accounts for more than 90%. The combined clay particle size should be less than 0.074mm and account for over 95%.
Physicochemical Indexes
Item
Index
Al2O3,% ≥
42
Volume Density,g/cm3 ≥
2.1
Compressive Strength,Mpa ≥
110℃×24h
30
1250℃×3h
40
Change Rate Of Reburning Line,% 1250℃×3h
±0.5
Item
Model
AL2CO3%
Sio2
%
Cao
%
Bulk Density
(g/cm3)
Temperature
℃
High-pure Bauxite
Based Low Cement
Castable
AC-FLO 781
78
15
2.3
2.73
1700
AC-FLO 751
73
18
2.4
2.56
1600
AC-FLO 461
72
19
2.2
2.61
1620
Corundum Mullite
Based Low Cement
Castable
AC-FLO 860
72
23
1.7
2.79
1750
AC-FLO 726
66
27
2.1
2.65
1700
Flint Clay Based
Castable
AC-FLO 651Y
55
39
2.3
2.47
1650
Fused Silica Based Castable
SF-CAST 520AC
23
73
3.7
2.05
1300
Light Weight
Insulating Castable
ALU-LITE 10
56
25
12.8
1.09
1300
ALU-LITE 15
58
26
8.6
1.55
1350
ALU-LITE 18
64
24
6.9
1.83
1400
Impermeable Castable
ALU-CAST 60FS
61
22
8.3
2.2
1350
Alumina Based Repair
Material
ALU-PAKR76AC
67
25
2.5
2.7
1650
ALU-PAKR85AC
83
8
2.8
2.8
1760
The aluminum content of clay castable can be produced according to customer demand, and the content of Al2O3 ranges from 30% to 48%;The volume density ranges from 0.8g/cm3 to 2.2g/cm3;
The index of clay pouring can be controlled by the formula of castable and the refractory raw material used, so the physical and chemical index of clay castable with different uses is also different.
Products Display:
Feature:
1. Refractory castable clay have good thermal exfoliation.
2. Fire clay refractory castables have good resistance to slag invasion.
3. Refractory casable fire clay have high refractoriness, up to 1550 ℃ ± 50 ℃.
4. Refractory fire clay castable have good plasticity and convenient construction.
5. Castable fire clay refractory have strong bonding strength and strong corrosion resistance.
Application:
The clay castable has a wide application range and can be applied to the lining of many kinds of high temperature industrial furnaces, such as soaking furnace and rolling mill heating furnace, all kinds of heat treatment furnaces, boilers, vertical and rotary pre-heating furnaces, high furnaces, electric furnaces, converters, etc.
Delivery:
Package Informations:
1. Package in Kraft bag or Plastic bag.
2. We can also pack the goods according to your requirement.
Transportation:
1. Fedex/DHL/UPS TNT as sample.
2. Partial shipment.
3. Designated freight forwarder or negotiable mode of transport.
4. Delivery time: 3 days for ordinary shape samples and 15 days for special shape samples.Delivery within 30 days of shipment.
FAQ :
1. What is your shipping service?
We can provide services for vessel booking, goods consolidation, customs declaration, shipping documents preparation and delivery bulk at the shipping port.
2. Do you have FBA service?
Yes, we have the good experience in providing the professional FBA service.
3. What mode of shipping do you offer？
We can provide shipping by sea, by air and by express.
4. What is your company's official website？
You can go through our website links as below:www.fshync.com
5. How about Huanya’s after-sale policy and term?
Our company Promise 1 year guarantee for regular castable as usual.
6. Can we act as your agent?
Of cource.
Contact us:
contact person：Martin
Tel/Whatsapp: +8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/unshaped-refractory/fire-clay-refractory-castable.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
19.05.2022 09:25:47
|
|
Wedge Fire Brick5
|
Product Name:Wedge Fire Brick
Product Description:
Wedge Fire Brick
Wedge fire brick Introduction
Wedge fire brick is a kind of refractory brick, according to the material can be divided into high aluminum and clay.High-alumina Wedge fire brick are usually classified into three grades according to the content of AI203.High alumina Wedge fire brick is a kind of refractory material with alumina content above 65%.High thermal stability, refractoriness above 1770℃.Clay Wedge fire brick belongs to weak acid refractories. For refractories above 1600℃, the initial temperature of load softening is very low, only 1250 ~ 1300℃.Clay high aluminum refractory Wedge fire brick is mainly used for electric furnace cover (furnace top), blast furnace (furnace body), hot blast furnace partition, ladle lining, steel barrel, hot metal car, cement kiln, glass kiln and other thermal furnace lining.Widely used in iron, steel, chemical, cement and other industries.
Features of Wedge fire brick:
1. High softening temperature under load and good slag resistance.
2. Good thermal shock stability
3. Acid and alkali resistance, low creep rate at high temperature
4. High resistance to high temperature,the refractory temperature is above 1730 ℃.
Application of Wedge fire brick:
High - alumina wedge fire brick used for electric furnace steelmaking, glass furnace, cement rotary furnace lining.High-alumina Wedge fire brick is widely used in steel, non-ferrous metal and other industries.Cray wedge-shaped brick brick is mainly used in blast furnace, hot blast furnace, heating furnace, power boiler, lime kiln, rotary kiln, ceramic and firebrick firing kiln, etc.
Product display：
Delivery
Package Informations:
1. Product packaging: ordinary tray wrapped film packaging/ordinary pallet cardboard packaging/fumigation pallet cardboard packaging
2. We can also pack the goods according to your requirements.
Shipping:
1. FEDEX/DHL/UPS/TNT for samples.
2. By Sea for batch goods.
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time:3 days for common shape samples;15 days for special shape samples.Within 30 days for batch goods.
FAQ:
1. What are your ways of packing?
We have five packages including PE bag, hand bag, zip lock bag, colorful box and white box currently.
2. What products does your company mainly produce?
Our main products: refractory material for industrial furnaces, such as high- alumina brick, clay brick, si l icon brick, high-strength diatomite brick, light weight insulation brick, low iron mullite brick, etc.;anti-stripping alumina brick, alkal i proof brick, phosphate brick for cement industry,etc.
3. Where we can get products information from?
You can go through our website links as below:www.fshync.com.
4. Do you provide OEM service?
Yes,we offer OEM service.
5. How can I order your products?
Please contact our sales staff to place an order.
6. What do I need to prepare to order the product?
Please provide detailed ordering information such as product name, model, material, design, size, quantity, surface treatment, etc.
Contact us:
contact person：Martin
Tel/Whatsapp: +8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/wedge-fire-brick.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
28.10.2022 09:18:27
|
|
High Alumina Anchor Brick For Kilns Construction60
|
Product Name:High Alumina Anchor Brick For Kilns Construction
Product Description:
High Alumina Anchor brick for kilns construction
Customized shape fire clay Anchor brick for kilns construction
anchor brick,Refractory high alumina anchor brick,anchor refractory brick
Product Description
The Al2O3 content of the Fire clay Brick is from 30-50%.During the manufacturing,first mix the clay chamotte with refractory clay powder,then prepared with clay aggregate into dry mud,high pressure molding,sintering at about 1400C.Under high temperature,the fire clay bricks show weakly acidic,and the ability of resistance to alkaline slag erosion is poor,but with the increase of the content of Al203,the thermal stability of fire clay bricks is better than silica brick, magnesia brick and so on.
The common problem of anchor bricks
The common problem of anchor bricks in use is fracture. The reason for fracture is directly related to three aspects of stress, the first tensile strength, the second compressive strength, and the third shear stress. The most common is that in addition to the tensile stress caused by gravity, it also bears a large shear stress during use. Because the temperature of the upper layer not buried in the castable is quite different from that of the lower layer, and the physical expansion after heating is also quite different, the temperature difference shear force will occur between the middle layers, and the magnitude of the shear force is the same as It is related to the expansion coefficient produced by the anchored brick after the temperature difference changes.
Consider anchoring bricks from the production aspect: one is refractoriness, and the other is tensile strength. The refractoriness is generally not a problem, the most important thing is the tensile strength. We are currently paying the most attention to the cold tensile strength of the brick. Because the weight of the entire furnace top hangs on the neck of the upper part of the hanging brick, which is often at a low temperature, so as long as the normal temperature strength of the brick is sufficient, it will not break, but if the normal temperature strength is insufficient, the so-called so-called will occur.
The material of the hanging brick and its strength characteristics at different temperatures, the strength of sintered refractory products mainly comes from the ceramic bonding between the particles in the refractory material. The higher the degree of ceramic bonding, the higher its strength. The ceramic bonding of high-alumina refractory products is mainly the result of liquid phase sintering, that is, the formation of a liquid phase in the refractory material at high temperatures promotes the bonding and material migration between particles. The higher the amount of liquid phase formed. The better the sintered strength, the higher the strength exhibited in the cold state. However, the cold state intensity and the hot state intensity are often contradictory. Although a large amount of high-temperature liquid phase promotes sintering and has high low-temperature strength, when used at high temperature, this large amount of liquid phase will reappear, and the high-temperature strength will decrease. The higher the amount of high temperature liquid phase, the lower the high temperature strength.
Application:
1) Cement and other building materials industry kiln back insulation;
2) Petrochemical, metallurgical, ceramics, glass industry, the furnace lining insulation;
3)Heat treatment furnace backlash insulation;
4)Non-ferrous metal industry back insulation;
5)High temperature reaction, heating equipment back insulation insulation
Packaging & Shipping
1. FEDEX/DHL/UPS/TNT for samples.
2. By Sea for batch goods.
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time:3 days for common shape samples;15 days for special shape samples.Within 30 days for batch goods.
FAQ
1.You are a manufacture or a trading company?
We are truly a manufacture,we not only can provide the high quality products with the best price,but also can offer the best pre-sale service and after-service.
2.What kind of product can you offer?Our company can offer a series products for kiln construction.For example:Refractory brick,refractory castable,refractory materials,ceramic fiber products.
3.Can your company provide samples or can we have a visit to your factory?
Of course,samples are available,and you are welcome to visit our factory at anytime.
4.What is the warranty for the refractory brick?
For all the refractory bricks,we have 1 year warranty,if any quality problems on our side during in this period,we will take responsibility of the cost of the shipment and the replacement.
Contact us
Contact person: Martin
Tel:8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Hot Tags: high alumina anchor brick for kilns construction, China, manufacturers, factory, customized, wholesale, low price, in stock, free sample, High Temperature Refractory Brick, Wedge Fire Brick, Calcium Silicate Board, Fire Clay Thin Brick, Insulation Brick, Refractory Bricks
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/high-aliminum-brick/high-alumina-anchor-brick-for-kilns.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
28.10.2022 09:18:28
|
|
Mullite Ceiling Brick95
|
Product Name:Mullite Ceiling Brick
Product Description:
Mullite Ceiling Brick
Mullite ceiling brick
hot selling mullite refractory insulation brick refractory anchors
Product Description
Mullite insulation brick
Mullite insulation brick is a high-alumina refractory material with mullite as the main crystal phase. Generally, the alumina content is between 40% and 70%. The working temperature ranges from 1300°C to 1600°C. The advantage of mullite lightweight insulation bricks is that they can be exposed to flames and can be directly used as the lining of high-temperature kilns. Mullite lightweight insulation brick is a refractory insulation material widely used in new industrial kilns and high-temperature equipment.
Mullite Ceiling Bricks - Mullite Hanging Bricks - Mullite Anchoring Bricks Mullite Ceiling Bricks product usage
Mullite ceiling tiles have high whiteness, uniform arrangement of pores, high flexural and compressive strength, and can be directly used for lining ceilings of various industrial kilns.
Mullite Ceiling Bricks - Mullite Hanging Bricks - Mullite Anchoring Bricks Mullite Ceiling Bricks Scope of application: It is used in various industrial kilns, such as bell furnaces, heating furnaces, cracking furnaces, heat treatment furnaces, shuttle kilns, tunnel kilns, roller kilns, enamel kilns, ceramic kilns for ceilings and walls and thermal insulation lining materials.
Mullite Ceiling Brick-Mullite Hanging Brick-Large roller kiln for mullite anchored brick building materials industry, large tunnel kiln for daily ceramic industry, shuttle kiln, push plate kiln, large red brick production line tunnel Kiln, refractory tunnel kiln, shuttle kiln, etc.
Mullite Ceiling Bricks - Mullite Hanging Bricks - Mullite Anchoring Bricks Mullite Ceiling Bricks Product Features:
1.Low thermal conductivity, with good thermal insulation effect.
2.Low thermal melting, low thermal conductivity, mullite series lightweight thermal insulation bricks accumulate little heat energy, and the energy saving effect is remarkable in intermittent operation;
3.Low impurity content has very low oxide content such as iron box alkali metal, high refractoriness; high aluminum content enables it to maintain good performance in reducing atmosphere;
4.High thermal compressive strength;
5.Appearance size, speed up the masonry, reduce the use of refractory mud, ensure the strength and stability of the masonry, thereby prolonging the life of the lining;
6.It can be processed into special shapes to reduce the number of bricks and joints.
Anchoring brick is a kind of brick for the top of industrial furnace, which includes a cylinder composed of hanging ends and anchors, and spaced grooves opened on the surface of the anchor, which are arranged along the length direction on at least one surface of the anchor. There are ribs. After the ribs are installed, the tensile and flexural strength of the anchor is significantly improved due to the reinforcement and pulling of the ribs, and the stress generated at the grooves is blocked at the ribs and cannot continue to be transmitted. Anchor bricks are not prone to breakage.
Our company
We were founded in 2000.After years of development,it has become a backbone enterprise in the production of refractories used in the fields of metallurgy,building materials,electric power,and chemical industry.The company has fixed assets of 170 million yuan and 158 employees, including 26 technical staffs. It has two subsidiaries, eight departments and 12 functional departments, six production plants, a R&D center and a test center.With the excellent production equipment complete detection means and strong technical forces,the company can achieve annual production of 45,700 tons,with the output value of 280 million RMB.In the year of 2010,we invested over 10 million RMB to build the advanced level of high-temperature aluminum-vanadium sintering production line in China,which implements strict control from raw materials to the products,to ensure the production quality,in addition,a domestic first-class provincial enterprise technology center was founded here.
FAQ
Q:Which payment terms can you accept?
A:T/T,L/C,Western Union,Moneygram,Paypal are available for us.
Q:Is your company accept customization?
A:We have own factory and excellent technical team,and we accept OEM service.
Q:How to slove the quality problems?
A:If the products are not confirmed to customer samples or have quality problems,our company will be responsible to make compensation for it.
Q. How you can control your quality?
For each production processing, we have complete QC system for the chemical composition
and Physical properties. After production, all the goods will be tested, and the quality certificate
will be shipped along with goods.
Q. What's your delivery time?
It usually needs about 20days- 45 days after receiving the deposit.
Contact us
Contact person: Martin
Tel:+8613923217470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/other-bricks/mullite-ceiling-brick.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
28.10.2022 09:18:28
|
|
Curved Alumina Clay Refractory Brick11
|
Product Name:Curved Alumina Clay Refractory Brick
Product Description:
Curved Alumina Clay Refractory Brick
Curved alumina clay refractory brick
Huanya supplying a comprehensive range of CLAY FIREBRICKS.Alumina content in approximate 28-45% are classified to CLAY FIREBRICKS
The main application for CLAY FIREBRICKS are listed below :
?Furnace construction
?Blast furnace/Hot blast stove
?Steel foundries
?Furnace in the nonferrous metal industry
?Coke oven and Gas furnace
?Glass industry
?Cement industry
?Safety lining of ladle
?Backup lining of boiler
Product Description
Note:Special-shaped Clay Firebrick is more expensive than common square or rectangle ones.
Why choose us
REASON ONE
Our vision is to offer the most effective refractory solutions that increase the productivity and competitiveness for our customers.
REASON TWO
Our main goal is to optimize your business and we strive to set new industry standards.
REASON THREE
We constantly challenge existing solutions in the pursuit of something better and find new ways to solve today s and tomorrows challenges.
Crucible furnace alchemy is carried out in a crucible furnace. The crucible furnace is made of ordinary clay refractory bricks, in the shape of a cone, the diameter of the upper part is smaller than that of the bottom, the bottom of the furnace is paved with 2-3 layers of refractory bricks with staggered joints, and the brick joints are made of refractory mud. The furnace shell is made of 3mm steel plate. The furnace lining is refractory brick masonry. Fill with asbestos ash or diatomaceous earth between the inner lining and the furnace shell. The top of the furnace is compressed with refractory bricks to ensure the temperature in the furnace. Fuels are usually heavy oil, diesel and gas, which are supplied from the side of the furnace. Without the above conditions, a coke oven can be used instead.
PRODUCTION SHOW
Huanya committed to developing and manufacturing high quality products for its customer.
Customers accept our products at first , then gradually getting fond of them , and finally they find that they have already relied on them Up to now , we have established cooperative relationships with many Giant Companies in refractory field.
We continue to serve all of our customers with best products and services . we are always on the road and never stop!
Contact person: Martin
Tel:8617328087470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
FAQ
1.Do you provide free samples?
Yes, we can provide a free sample for testing, If we have sample in stock,
The quantity based on the material type, The buyer should bear all the shipping costs.
2.How you can control your quality?
Each production processing, we have complete QC system for the chemical composition
and Physical properties. After production, all the goods will be tested, and the quality certificate
3.Can we visit your company?
Yes, certainly. You are very welcome to China and we will be honored to have a customer and friend.
4.What is the service life of the bricks?
The service life of different bricks is unlike.It also depends on your using condition and method.
5. What's your delivery time?
It usually needs about 20days- 45 days after receiving the deposit.
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/fireclay-brick/curved-alumina-clay-refractory-brick.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
28.10.2022 09:18:28
|
|
Round Cake Bricks63
|
Product Name:Round Cake Bricks
Product Description:
Round cake bricks
Clay bricks are made of 50% soft clay and 50% hard clay clinker, which are batched according to the specified particle size requirements. The mineral composition of clay bricks is mainly kaolinite (Al2O3 2SiO2 2H2O) and 6% to 7% impurities (oxides of potassium, sodium, calcium, titanium and iron).
Round cake bricks are often used in the lining of circular kilns and the position of U-shaped furnace doors, and are used in metallurgy, building materials, chemical industry, petroleum, machinery manufacturing and other industrial fields.
Clay bricks belong to weak acid refractory products, which can resist the erosion of acid slag and acid gas, and have slightly poor resistance to alkaline substances. Clay bricks have good thermal performance and are resistant to rapid cooling and rapid heating.
It has the characteristics of fire prevention, heat insulation, sound insulation, moisture absorption, heat resistance, high strength, shock resistance, chemical corrosion resistance and so on!
Brand: Durable
Product name: Clay brick
Material: Clay
Operating temperature:1200-1430°C
Specification:230*114*65
Refractoriness:1680°C
Can be customized: customized according to user needs
Product introduction: High alumina bauxite clinker is used as the main raw material, soft clay and waste pulp and paper liquid are used as binders.
Product feature
1：
High refractoriness
Clay bricks have high refractoriness up to 1680°C, and are widely used in the masonry maintenance of various high-temperature kilns.
2：
High softening temperature under load
The softening temperature under load is 1250-1450 degrees Celsius, with a wide range of variation.
3：
Strong slag resistance
Chemical resistance, acid resistance is greater than alkali resistance.
4
low thermal conductivity
Low thermal conductivity and low thermal expansion coefficient.
Need to know before purchase
1: As the price fluctuates due to the price of raw materials, the product price is for reference only, and you should not directly photograph it. Before placing an order, please confirm the price with the customer service. If you photograph it directly, you will not ship.
2. The product may cause chromatic aberration due to shooting angle, light and other factors, but it cannot be used as a reason for return or compensation.
3. Before delivery, the business manager will communicate with you in detail and adopt a convenient and real-time logistics method. The specific expenses are subject to the actual payment.
4. Please contact the customer service in time if you have any questions about after-sales use, and we will solve the problem for you at the first time.
FOSHAN HUANYA NEW MATERIAL CO., LTD : "quality first, reputation first, customer first: it is our aim."Scientific management, strong technical force, perfect testing means, advanced technological equipment and stable product quality are the guarantee of quality service. FOSHAN HUANYA kiln refractories co., LTD sincerely hopes to cooperate with you hand in hand and in good faith.
FAQ
Q:How are the products' quality?
The products will be strictly inspected before shipment, so the quality could be guaranteed.
Q:What's your payment terms?
We can accept 30% deposit, 70% balance before shipment for ordrs over $ 2000.
will be shipped along with goods.
Q:What is the difference between Refractoriness and Working temperature ?
Refractoriness:the refractory material withstands high temperature without melting and softening performance in the absence of load resistance.Usually working temperature is less than refractoriness about 350-400°C.
Q:Can we get support if we have our own market position?
Please inform us your detailed mind on your market demand,we will discuss and propose helpful suggestion for you,to find the best solution for you.
Q:What standards do we have?
Our products meet the standards, such as ASTM, ASME, AMS, DIN, JIS etc.
The third party testing is all available for us.
Contact person: Martin
Tel:8617328087470
Email: Martin@huanya-refractory.com
www.huanya-refractory.com
Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Price:1.00
Product Website:https://www.huanya-refractory.com/refractory-bricks/fireclay-brick/round-cake-bricks.html
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China
Descption:Huanya refractory headquarters in Foshan,Guangzhou ,our company has production, R&D
capability and sales of specialization refractory service providers, specializing in high-end
refractories, finished products and raw materials. The major applications of the industry are
ferrous metal casting and nonferrous metals Metal casting, thermal power generation, waste
incineration, glass ceramics, boilers, etc.. Huanya refractory to quality services to provide
customers with Safe, reliable and high performance fire-resistant insulation solutions for
customers throughout 32 provinces and municipalities of China, as well as Southeast Asia
and the middle east Africa. America, etc.
Registered Capital:100
EmployeeNum:100
Foshan Huanya New Material Co., Ltd.
Contact:Martin
Telphone:86-0757-85503335-0
Fax:86-0757-85503335-0
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
|